Home / Products / Kunbus Industrial Devices / Embedded Communication Modules / KUNBUS-COM / EtherNet/IP KUNBUS-COM

EtherNet/IP KUNBUS-COM

Powerful communication module for EtherNet/IP networks

HIGHLIGHTS

ERNI SMC plug-in connector with 32 pins to the application
Freely configurable via Modbus RTU/terminal
Galvanic separation of bus and application up to 1.5 kV
Same pin-out to the application for all COM variants
Low power consumption
CDI service interface (config, debug, status)
Indication LEDs
ODVA certified

DESCRIPTION

The KUNBUS-COM communication interfaces (EtherNet/IP piggyback card, option card) were created on the basis of the KUNBUS-IC family. This variant (EtherNet/IP, serial to Ethernet, RS232) is provided with high-quality plug-in connectors for the bus connection, an SMC plug with 32 pins to the application or the control, the optoelectronic couplers, memory, bus drivers, and the micro controller.

Your control becomes EtherNet/IP-enabled simply by plugging-in the control card or via a cable. Because of the uniform pin-out of all COM modules, they can be replaced easily by other variants (for example PROFINET, EtherCAT, etc.).

APPLICATION INTERFACE AS REQUIRED VIA:

SSC shift register interface (SPI)
Automatic shift register recognition
Automatic Baud rate recognition
SDI Modbus interface to the application
RS485, RS232, UART
Protocolscripter
Dual port RAM interface

SPECIFICATIONS

Dimensions	85 x 65 x 12 mm (LxWxH)
Power supply	3.3V
Operating temperature	0°C to +60°C
Storage temperature	-40°C to +85°C
Humidity	0% to 95%, non-condensing
Condensing	not allowed
Mechanical shock load	15G
Permanent mechanical stress	5G